WEEB Wiley Electronics WEEB-LUG-6.7 Lay-In Lug and Hardware solar

Description

This auction is for 1-Lug. Please feel free to make an offer if you need a larger quantity,
Wiley Electronics is the creator of the well known bonding washers WEEB. WEEB stands for ?washer, electrical equipment bonding?. WEEB products are used to bond solar modules to aluminum racking and mounting rails. The solar modules and the racking system are then grounded, grounding and interconnecting the entire assembly into one single grounding system. The use of WEEBs eliminates the need to use a lay-in lug and/or a thread-forming screw on each module. The use of WEEBs also eliminates the need to run a continuous wire to each module. Wire is only needed to connect a lay-in lug on each mounting rail to an equipment grounding terminal in the inverter or disconnect.
It has been continuously proven that WEEBs save installers time and money. WEEB products are
ETL listed to UL standards
. WEEB products meet the requirements of
UL 467
.
The
WEEB-LUG-6.7 grounding lug
provides a connection to the mounting system and has lay-in provision for an
equipment ground conductor
. The WEEB-LUG-6.7 Lug kit includes the lay-in lug, matching WEEB washer, bolt, nut, flat washer and lock washer. Two WEEB lugs and a short piece of bare wire can be used to connect across a rail splice.
Mounting hardware is included.
Dimensions: 1.60" x 0.71" x 0.47"
Hardware (included): 1/4"