-40%

12V WindZilla PMA Pelton Water Wheel 17mm Adapter Micro Hydro Generator Turbine

$ 142.03

Availability: 99 in stock
  • Return shipping will be paid by: Buyer
  • Restocking Fee: No
  • Item must be returned within: 30 Days
  • MPN: Does Not Apply
  • Condition: New
  • Brand: GreenergyStar
  • All returns accepted: Returns Accepted
  • Refund will be given as: Money Back

    Description

    12V WindZilla Permanent Magnet Generator
    +
    8"
    Pelton Water Wheel
    + 20mm to 17mm Pelton Water Wheel Adapter / Arbor
    For Micro Hydro Electric Generator / Turbine
    Installation:
    1. Mount Adapter to the PMA's 17mm shaft and secure with the 2 included setscrews.
    2. Mount Pelton Water Wheel to the Adapter and secure with the 4 included M5 screws.
    I
    Specification:
    Diameter
    204mm, 8.03inch
    Shaft Diameter
    20mm, 0.79inch
    Hub Material
    Aluminum
    Number of Mounting Holes
    4
    Mounting Holes Diameter
    5mm
    Distance of Mounting Holes from Hub Center
    17.5mm, 0.69inch
    Number of Spoons
    12
    Spoon Material
    Die Cast Aluminum
    Spoon Outer Diamter
    46mm, 1.81inch
    Spoon Inner Diameter
    37mm, 1.46inch
    Spoon Height
    15mm, 0.59inch
    Spoon Depth
    10mm, 0.39inch
    Weight
    600g
    20mm to 17mm Adapter /Arbor designed to secure the Pelton Water Wheel onto a PMA (Permanent Magnet Alternator) with 17mm shaft. The adapter is CNC machined and is made of aluminum for higher durability and corrosion resistance.
    One alternator included only
    (Above is a mirror image)
    Introduction
    The WindZilla Permanent Magnet Alternator is the major component in a small wind / hydro electric generation system. This alternator is perfect for enthusiast who are interested in a DIY Wind Turbine Project. Since this is an alternator, it will generate 3 phase AC electricity. The advantages of an alternator compare to a DC motor are:
    1. Alternators have longer life than DC motors. The only thing that will wear out is the bearing (around 20 years). And by a simple bearing swap will allow your turbine to go another 20 years
    2. Alternators are more efficient than DC motors because they are built to generate electricity. In addition, there will be less voltage drop in AC electricity compare to DC. Alternatively, DC motors has the option to work as a generator or a motor.
    Generator Installation:
    Unlike conventional generators in the market where you have to tie it down to a brace, or use super glue to stabilize it, our generator has foot mount for easy installation. All you need is 4 bolts to secure the unit to whatever you like. And you will never have to spend extra money on mounts.
    Back of Alternator
    28 fins to act as heat sink to dissipate heat. Heavy Duty.
    Video showing our bench test of the alternator at ~1500RPM
    Curve:
    Open Circuit Voltage, Reach 12V at 300RPM
    The above battery charging power curve is obtained from charging a 12V 88Ah battery bank with our
    SolarWind Hybrid Charge Controller
    .
    (not included in this listing)
    We have seen there are generators out there that hits 12V as few as 150 RPM. However, the amp output will not be impressive because in order to ramp up the voltage, thin wires must be used in the winding of the alternator which will impact the output in strong wind. As a consumer, this is a trade off that you have to decide. Our motors are built with a heavier focus on amp output and therefore it will reach 12V at: 300RPM
    Since wind speed increases with height, increases to the tower height can mean enormous increases in the amount of electricity generated by a wind turbine.
    Generator Specification:
    Voltage
    3Phase 12 VAC
    Permanent Magnet
    Rare Earth Neodymium magnets
    Moisture /Corrosion Resistance
    Yes, sealed exterior, ball bearing, coated rotor
    Shaft Daimeter
    15mm
    RPM at 12V
    300RPM
    Body Material
    Aluminium Alloy & Steel
    Rotor Diameter
    14.8cm (5.8 inches)
    Length
    7.2cm (2.8 inches)
    Weight
    3.0kg (6.6 lbs)
    Mount
    Yes, Foot Mount
    Cable Length
    approx. 18cm (7inch)
    Rotation
    Bi-directional, recommend clockwise
    You might be interested in the following auctions (not included):
    6 x 62" Wind Turbine Generator Blades + Hub + Nose Cone 6 socket fit Air-X 403
    Charge Controller for Wind Generator Air-X Ametek Solar
    225 AMPS A SLIP RING FOR 3 PHASE AC / DC 12 24 V WIND TUBINE.
    1200 Watts 10.5 V-28 V DC Grid Tie Inverter
    74.5mm 2 1/2" Pole Tower Mounting Base Foundation for Wind TUrbine
    73.5mm 2 1/2" Aluminum Cable/Wire Mount
    WARNING !!!
    Rotating turbines present a serious mechanical hazard that can cause serious injury. Under no circumstances should you install the turbine where a
    person could come in contact with moving rotor blades.
    The installer of these blades is solely responsible for the use or misuse of these turbines. We assume no liability for ANY injuries caused by these products.
    NO OPERATING COST
    GENERATES ELECTRICITY FROM THE ABUNDANT RESOURCE
    Terms & Conditions
    Bidding this auction means that you agree with the following terms & conditions.
    All pictures and descriptions are subjected to change without notice. Items may not look exactly the same as the auction shown. We are not responsible for any inadvertent errors.
    Payment
    Total payment = winning price + shipping & handling
    Insufficient payment will be charge extra US{{detail_product_description}}.50 to compensate the Paypal penalty fees.
    Shipping
    &
    Handling
    Total shipping = Base S&H + Combine S&H ( for each additional item )
    a) Base S&H is the highest shipping cost of the first item.
    1. Combine shipments are only available on the condition of a
    SINGLE PAYMENT
    . Auctions that are paid separately will NOT be shipped in combo and therefore, they are not qualified for shipping discounts.
    2. We ship within 2 working days after payment is received and confirmed. Please allow up to
    5-10 BUSINESS DAYS
    for item(s) with a physical address sending to the 48 states of United States & Canada. For international bidders, the shipping time varies with respect to your location.
    3. Bounce backs due to incorrect shipping address will result in setback on deliveries. It is the buyer's responsibility to repay the shipping & handling fees.
    4. We are not responsible for any loses or damages resulting from shipping.
    Return & Refund Policy
    No refunds after 30 days
    Shipping & handling & other service fees are
    NOT
    refundable
    All returned items must be in original packing.
    Items that are used/ damaged/ deformed or altered in any ways will not be accepted.
    A 20% restocking fee will be charged on all refunded items.
    E-mails
    E-mails are usually answered within 2~3 business days in priority order.
    Spams and mass e-mailing will be deleted without slightest glance.
    E-mails with virus or anything subjected to hacking are automatically deleted.